====== Frame ======

===== Parts list =====

  * Alu-extrusions
    * 4 x 400mm (20x40)
    * 4 x 300mm (20x40)
  * 3D-printed parts
    * 8 x mcs_l-verbinder_stabil_60x60
    * 4 x mcs_endkappe_40x20
    * 12 x mcs_winkel_stabil_40x20
    * 2 x mcs_wuerfelverbinder_20x20
    * 2 x mcs_endkappe_60x20
  * 124 x Screws (DIN 7984)
    * (7 x 8) x //M5x10mm// (for mcs_l-verbinder_stabil_60x60)
    * (2 x 4) x //M5x10mm// (for mcs_endkappe_40x20)
    * (4 x 12) x //M5x8mm// (for mcs_winkel_stabil_40x20)
    * (3 x 2) x //M5x8mm// (for mcs_wuerfelverbinder_20x20)
    * (3 x 2) x //M5x10mm// (for mcs_endkappe_60x20)
  * 110 x Slot Nuts (M5 I-Type slot 5)
    * (5 x 8) x //M5 I-Type slot 5// (for mcs_l-verbinder_stabil_60x60)
    * (4 x 12) x //M5 I-Type slot 5// (for mcs_winkel_stabil_40x20)
    * (3 x 2) x //M5 I-Type slot 5// (for mcs_wuerfelverbinder_20x20)

===== Assembly =====

==== Lower Frame ====

  - Mount corner connectors (mcs_l-verbinder_stabil_60x60) to horizontal extrusions (300mm)
  - connect 2 of the horizontal extrusions with 2 extrusions (400mm) (forms a rectangle)
  - add angle connectors (mcs_winkel_stabil_40x20) to support the new struts
  - connect third horizontal bar to the just build rectangle 120mm from the rear horizontal extrusion using angle connectors (mcs_winkel_stabil_40x20)
  - add end covers (mcs_endkappe_40x20) to the sides of the foremost and hindmost extrusions

==== Vertical Frame ====

  - combine 3 extrusion (300mm) to form a "U"-Form using angle connectors (mcs_winkel_stabil_40x20)
  - reinforce using corner connectors (mcs_l-verbinder_stabil_60x60)
  - add end covers (mcs_endkappe_60x20) to the "bottom" of the "U"

==== Connect everything ====

  - connect the vertical frame (invert the "U") with the lower frame using cube connectors (mcs_wuerfelverbinder_20x20)
  - add angle connectors (mcs_winkel_stabil_40x20) to strengthen the connection between the long struts (400mm) and the vertical frames "legs"
  - add corner connectors (mcs_l-verbinder_stabil_60x60) to finalize

==== Protokoll Cafe Europa ====

 * [[projekte:minifraese:protocol_frame|Protokoll]]