projekte:2015:hexagon_v2
Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
| Vorhergehende Überarbeitung | |||
| — | projekte:2015:hexagon_v2 [2017/06/16 22:22] (aktuell) – ralf | ||
|---|---|---|---|
| Zeile 1: | Zeile 1: | ||
| + | ~~DISCUSSION~~ | ||
| + | |||
| + | {{: | ||
| + | ====== Hexagon V2 ====== | ||
| + | |||
| + | ---- | ||
| + | |||
| + | ===== Technische Daten ===== | ||
| + | |||
| + | * Aufstellfläche B x T x H 350 x 390 x 915 mm | ||
| + | * max. Druckhöhe 430 mm | ||
| + | * Druckbereich D = 200 mm | ||
| + | * Gewicht mit Netzteil 11 Kg | ||
| + | * Dauerdruckplatte 216 x 216 mm mit Silikonheizmatte 12V/160W bis 130°C | ||
| + | * Linearführungen igus® drylin® N 27 | ||
| + | * igus® igubal® Gelenkköpfe | ||
| + | * Filament Durchmesser 1,75 mm (ABS, smartABS, HIPS, PLA, PETG, Iglidur, HDglass, TPC flex 65 und Nylon getestet, weitere Materialien möglich) | ||
| + | * Hotend E3D V6 mit Düse 0,4 mm (0,25 - 0,6 mm erhältlich) | ||
| + | * Layerhöhe ab 0,05 mm getestet | ||
| + | * Auflösung z-Richtung (Höhe) 0.0125 mm | ||
| + | * Auflösung x-/ | ||
| + | * Druckgeschwindigkeiten bis 150 mm/s getestet | ||
| + | * Verfahrgeschwindigkeit bis 500 mm/s getestet | ||
| + | * Elektronik Arduino Due 32bit mit Radds v1.1 Shield und LCD 4 x 20 Zeichen | ||
| + | * Motortreiber SilentStepStick - TMC2100 (Interpolation von bis zu 256 Mikroschritte) | ||
| + | * Netzteil 13,8V/25A | ||
| + | * Firmware Repetier v0.92 | ||
| + | |||
| + | ---- | ||
| + | |||
| + | ===== Bilder ===== | ||
| + | |||
| + | |{{: | ||
| + | |{{: | ||
| + | |||
| + | ---- | ||
| + | |||
| + | ===== STL Dateien ===== | ||
| + | |||
| + | Empfohlene Druckparameter: | ||
| + | |||
| + | * Schichtdicke 0,25 mm | ||
| + | * Infill 33 % | ||
| + | |||
| + | ^Beschreibung^Anzahl^Download^Bild| | ||
| + | |bottom_motor_v_2_0| | ||
| + | |bottom_front_v_2_0| | ||
| + | |bottom_b_v_2_0| | ||
| + | |carriage_v_2_3_1| | ||
| + | |carriage_strebe_v_2_3| | ||
| + | |platform_e3d_b_v_2_1| | ||
| + | |platform_e3d_v_2_2| | ||
| + | |spoolholder_52x60mm_v_2_0| | ||
| + | |top_front_v_2_0| | ||
| + | |top_idler_v_2_0| | ||
| + | |top_mid_v_2_0| | ||
| + | |top_v_2_0| | ||
| + | |anschlussblende_v_2_0| | ||
| + | |anschlussblende_blind_v_2_0| | ||
| + | |display_gehaeuse_v_2_3| | ||
| + | |display_taster_v_2_0| | ||
| + | |display_knob_v_2_2.stl| | ||
| + | |bowden_extruder_block_v_2_1| | ||
| + | |bowden_extruder_buegel_v_2_1| | ||
| + | |bowden_extruder_klammer_v_2_1| | ||
| + | |schiene_schablone_v_2_0| | ||
| + | |||
| + | —- | ||
| + | |||
| + | ===== Vorlagen Lasercutter ===== | ||
| + | |||
| + | ^Beschreibung^Anzahl^Download^Bild| | ||
| + | |Arbeitsplatte - Acryl schwarz 5 mm|1|{{: | ||
| + | |Grundplatte - Acryl schwarz 3 mm|1|{{: | ||
| + | |Displayblende - Acryl orange 3 mm|1|{{: | ||
| + | |NEMA 17 Korkdämpfer - Kork 3 mm|3|{{: | ||
| + | |Heizmatte Isolierung - Kork 5 mm|1|{{: | ||
| + | |Extruder Dämpfer - Kork 3 mm|1|{{: | ||
| + | |Logo|1|{{ | ||
| + | |||
| + | ---- | ||
| + | |||
| + | ===== Stückliste ===== | ||
| + | |||
| + | | ^Beschreibung^Anzahl^Bezugsquelle^Kosten| | ||
| + | ^Aluprofile Nut 5|20 x 20 x 900 mm 3N|5|[[http:// | ||
| + | ^ |20 x 20 x 150 mm|7|[[http:// | ||
| + | ^ |20 x 40 x 150 mm|6|[[http:// | ||
| + | ^ |20 x 60 x 150 mm|4|[[http:// | ||
| + | ^Linearführungen mit Schlitten|igus® drylin® N 27 NK -02-27-2-788|3|[[http:// | ||
| + | ^Kugelgelenke|igus® igubal® Gelenkkopf KBRM-03 MH|12|[[http:// | ||
| + | ^ | ||
| + | ^Elektronik|Arduino Due|1|[[https:// | ||
| + | ^ |RADDS Board V1.1|1|[[https:// | ||
| + | ^ |RADDS Display 20 x 4|1|[[https:// | ||
| + | ^ |SilentStepStick - TMC2100 Schrittmotortreiber|4|[[https:// | ||
| + | ^ |Netzteil 13.8V 25A|1|[[https:// | ||
| + | ^ |Microschalter Omron|3|[[https:// | ||
| + | ^ |Axiallüfter 40 x 40 x 10 mm|2|[[http:// | ||
| + | ^ |Axiallüfter 60 x 60 x 10 mm|1| | ||
| + | ^Kabel|Lapp Unitronic LiYCY 10 x 0,14 mm²|2 m| | ||
| + | ^ |Lapp Unitronic LiYCY 4 x 0,14 mm²|1 m| | ||
| + | ^ |Lapp Unitronic LiYCY 2 x 0,14 mm²|4 m| | ||
| + | ^ |Silikonlitze 2,5 mm² rot|2 m|[[http:// | ||
| + | ^ |Silikonlitze 2,5 mm² schwarz|2 m|[[http:// | ||
| + | ^ |USB Anschlussbuchse|1|[[http:// | ||
| + | ^ |USB Anschlusskabel intern - USB St. A/USB Micro St. B|1|[[http:// | ||
| + | ^ |USB Anschlusskabel extern|1|[[http:// | ||
| + | ^Motoren|Stepper-Motor 42BYGHW609 (1.7A) Nema17|3|[[https:// | ||
| + | ^ |Stepper-Motor 42BYGHW811 (2.5A) Nema17|1|[[https:// | ||
| + | ^ |Nema17 Korkdämpfer|3|[[http:// | ||
| + | ^Druckbett|Dauerdruckplatte Aluminium|1|[[https:// | ||
| + | ^ |Kapton-Heizmatte 12V|1|[[https:// | ||
| + | ^ |Wärmedämmung Kork 216 x 216 x 5 mm|1| | ||
| + | ^ |3M 467MP doppelseitiges Klebeband | ||
| + | ^Hotend|E3D v6 HotEnd Full Kit - 1.75mm Universal (mit Bowden add-on)|1|[[https:// | ||
| + | ^ |Threaded Bowden Coupling (1.75mm Filament)|1|[[https:// | ||
| + | ^ |Bowden (1.75mm Filament)|2 m|[[https:// | ||
| + | ^Zahnriemen|GT2 x 6 mm|6 m|[[https:// | ||
| + | ^Pulleys|GT2 - 20 Zähne|3|[[https:// | ||
| + | ^ |MK8 gerändelter Pulley|1| | ||
| + | ^Rods|Karbonstab 6 x 3 mm|1,5 m|[[http:// | ||
| + | ^Acryl|Acryl schwarz 400 x 400 x 5 mm|1|[[http:// | ||
| + | ^ | ||
| + | ^ | ||
| + | ^Kugellager|Bundlager MF115 ZZ|6| |6.00 €| | ||
| + | ^ | ||
| + | ^ | ||
| + | ^Schrauben, Muttern usw.|Schrauben ISO7380 M5 x 8|111| | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^Sonstiges|Flachsteckhülsen RS 2, | ||
| + | ^ |Flachsteckhülsen RS 4, | ||
| + | ^ |Aderendhülsen 0,25 mm² - 8 mm hellblau|6|[[http:// | ||
| + | ^ |Aderendhülsen 1,50 mm² - 8 mm schwarz|2|[[http:// | ||
| + | ^ |Aderendhülsen 2,50 mm² - 8 mm blau|4|[[http:// | ||
| + | ^ |Krimpkontakte 2,54mm weiblich|30|[[http:// | ||
| + | ^ |Krimpkontakte 2,54mm männlich|4|[[http:// | ||
| + | ^ |Krimpgehäuse 2,54mm 2-polig|5|[[http:// | ||
| + | ^ |Krimpgehäuse 2,54mm 4-polig|6|[[http:// | ||
| + | ^ |JST Steckverbinder|4|[[http:// | ||
| + | ^ |Einschraubbuchse 4mm schwarz|2|[[http:// | ||
| + | ^ |Einschraubbuchse 4mm rot|2|[[http:// | ||
| + | ^ |Bananenstecker 4mm schwarz|3|[[http:// | ||
| + | ^ |Bananenstecker 4mm rot|3|[[http:// | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^ | ||
| + | ^Druckteile|Aufstellung s.o.| | ||
| + | ^Dienstleistung|Lasern Kork und Acryl| | ||
| + | |||
| + | Die angegebenen Kosten sind incl.MWSt und ohne Gewähr. Anfallende Versandkosten wurden nicht berücksichtigt. | ||
| + | |||
| + | Angegebene Bezugsquellen sind nur beispielhaft, | ||
| + | |||
| + | ---- | ||
| + | |||
| + | ===== Dokumentation Aufbau ===== | ||
| + | |||
| + | **A - Vorarbeiten** | ||
| + | |||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | |||
| + | **B - Zusammenbau** | ||
| + | |||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | |||
| + | **C - Firmware** | ||
| + | |||
| + | * [[: | ||
| + | |||
| + | **D - Kalibrieren** | ||
| + | |||
| + | * [[: | ||
| + | * [[: | ||
| + | * [[: | ||
| + | |||
| + | **E - Software** | ||
| + | |||
| + | * E1 - Hostprogramm installieren | ||
| + | * E2 - Slicerprofile installieren | ||
| + | * E3 - erster Druck | ||
| + | |||
| + | ---- | ||
| + | |||
| + | ===== getestete Filamente ===== | ||
| + | |||
| + | ^Material^Hotend Temp.^Heizbett Temp.^Anmerkung| | ||
| + | |PLA|215° - 235° C|70° C| | | ||
| + | |ABS|220° - 250° C|110° C| | | ||
| + | |Nylon taulman 618|245° C|60° C|Heizbett mit Blue Tape beklebt| | ||
| + | |Nylon Orbi-Tech|250° C|60° C|Heizbett mit Blue Tape beklebt| | ||
| + | |smartABS|245° C|110° C| | | ||
| + | |PETG|245° C|70° C| | | ||
| + | |TPC flex 65|250° C|100° C| | | ||
| + | |Iglidur Tribo 170-PF| | | | | ||
| + | |Iglidur Tribo 180-PF| | | | | ||
| + | |HIPS| | | | | ||
| + | |||
| + | ---- | ||
| + | |||
| + | ===== Ansprechpartner ===== | ||
| + | |||
| + | [[gerd.keller@me.com|Gerd Keller]] | ||
| + | |||
| + | ---- | ||
| + | |||
| + | ===== Lizenz ===== | ||
| + | |||
| + | < | ||
| + | |||
| + | |||
| + | ---- | ||
| + | |||