projekte:lasersaur-overview:mechanik-bom
Dies ist eine alte Version des Dokuments!
Inhaltsverzeichnis
Bill of Materials Mechanik
Händler und Preise
Alle Preise ohne Mehrwertsteuer
Aluprofiltechnik
Sind das bei Motedis die richtigen? Schneidet TECwalker genau genug zu?
Aluprofile
Nutensteine
Wie unterscheiden sich „post“ und „pre“ Nutensteine? pre sind eckig, post rund?
Post: Kann nachträglich eingekippt werden
Pre: Muss vor Montage der Winkel eingeschoben werden!
Preise sind hier nicht für einzelstücke, sondern für alle Nutensteine.
Was für ein Material brauchen wir? TECwalker ist momentan mit „ST verzinkt“ gerechnet.
Mechanik-Liste (überarbeitet)
| Anzahl | Beschreibung | CAD-Name | Motedis | TECWalker |
|---|---|---|---|---|
| Verbindungswinkel | ||||
| 1 | L-Winkelprofil | HFLBS5-1410 | | |
| 50 | singel | HBLFSN5 | 1,13€ | |
| 20 | singel, black | HBLFSNB5 | 1,13€ | |
| 38 | double | HBLFSD5 | | |
| 8 | double, light | HBLSD5 | | |
| 7 | double, heavy | HBLFSDW5 | | |
| Kugellager | ||||
| 6 | 5x19x6mm | B635ZZ | ||
| 9 | 6x19x6mm | B626ZZ | ||
| 28 | 5x14x5mm | B605ZZ | ||
| Kabelträger | ||||
| 2 | 20-gliedrig | MHPKS101-19-20-S | ||
| 1 | 23-gliedrig | MHPUS102-19-23-S | ||
| 1 | Gasfeder | FGSS22150B | ||
| 3 | Scharniere | HHPSN5 | ||
| Aluverbundblech | ||||
| 1 | 1166x356x3mm | HFPAL-3-1166-356 | ||
| 2 | 1166x847x2mm | PAAL-1166-847-2 | ||
| 1 | 247x216x3mm | HFPAL-3-247-216 | ||
| 2 | 847x213x3mm | HFPAL-3-847-213 | ||
| 2 | 847x268x3mm | HFPAL-3-847-268 | ||
| 2 | 847x356x3mm | HFPAL-3-847-356 | ||
| 1 | 917x356x3mm | HFPAL-3-917-356 | ||
| Muttern | ||||
| 34 | DIN934 Mutter M3 | |||
| 10 | DIN985 M4 selbstsichernd | |||
| 52 | DIN985 M5 selbstsichernd | |||
| 1 | Panel Rubber Seal 12 Meters | HSCP3H-B-12 | ||
| 10 | Planar Bracket, double | SHPTSD5 | ||
| 2 | Plastik-Griffe | UPCN19-B-36 | ||
| Kunststoffplatte | ||||
| 2 | 600x130x3mm | PCTBA-600-130-3 | ||
| 2 | 600x110x3mm | PCTBA-600-110-3 | ||
| 2 | 807x60x3mm | PCTBA-807-60-3 | ||
| 2 | 847x143x3mm | PCTBA-847-143-3 | ||
| 2 | 892x847x3mm | PCTBA-892-847-3 | ||
| Drive Shaft, stepped | ||||
| 1 | SFAJ12-26-F24-P6-T6 | |||
| 1 | SFAJ12-40-F16-P6-T16 | |||
| 2 | SFAJ12-620-F18-P6-T8 | |||
| 2 | SFAJ12-40-F16-P6-T24 | |||
| Schrauben | ||||
| 42 | DIN912 M3x10 | |||
| 16 | DIN912 m3x16 | |||
| 5 | DIN912 M3x25 | |||
| 18 | ISO7380 (Knopf) M3x6 | |||
| 12 | DIN912 M4x16 | |||
| 146 | DIN912 M5x8 | |||
| 368 | DIN912 M5x10 | |||
| 30 | DIN912 M5x12 | |||
| 28 | DIN912 M5x16 | |||
| 38 | DIN912 M5x20 | |||
| 11 | DIN912 M5x25 (Selbstsichernd) | |||
| 162 | ISO7380 (Knopf) M5x6 | |||
| 12 | DIN7991 (Senkkopf) M5x8 | |||
| 5 | DIN7991 (Senkkopf) M5x12 | |||
| 6 | DIN7984 (Flachkopf) M5x16 | |||
| 25 | DIN7984 (Flachkopf) M5x30 | |||
| 4 | Wellenkupplung, 6mm zu 6mm | MCKSC20-6-6 | ||
| 3 | Slide Washer | SWSPT25-10-1.0 | ||
| Timing Belt GT 3M 9mm | ||||
| 1 | 109 Zähne | GBN3273GT-90 | ||
| 1 | 65 Zähne | GBN1953GT-90 | ||
| Pulleys GT 3M | ||||
| 1 | 18 Zähne, 5mm Bohrung | GPA18GT3090-A-P5 | ||
| 1 | 48 Zähne, 12mm Bohrung | GPA48GT3090-A-P12 | ||
| 1 | 22 Zähne, 6,35mm Bohrung | GPA22GT3090-A-P6.35 | ||
| 1 | 60 Zähne, 12mm Bohrung | GPA60GT3090-A-P12-FC59 | ||
| 3 | 20 Zähne, 6mm Bohrung | GPA20GT3090-A-P6 | ||
| Profile | ||||
| 20×20 1781mm | ||||
| 1 | 20mm x 20mm, 1564mm | |||
| 1 | 20mm x 20mm, 57mm | |||
| 2 | 20mm x 20mm, 80mm | |||
| 20×40 26763mm | ||||
| 3 | 20mm x 40mm, 100mm | |||
| 2 | 20mm x 40mm, 1130mm | |||
| 2 | 20mm x 40mm, 120mm | |||
| 1 | 20mm x 40mm, 142mm | |||
| 4 | 20mm x 40mm, 1260mm | |||
| 1 | 20mm x 40mm, 148mm | |||
| 1 | 20mm x 40mm, 1564mm | |||
| 4 | 20mm x 40mm, 1620mm | |||
| 4 | 20mm x 40mm, 190mm | |||
| 1 | 20mm x 40mm, 320mm | |||
| 1 | 20mm x 40mm, 63mm | |||
| 2 | 20mm x 40mm, 750mm | |||
| 1 | 20mm x 40mm, 55mm | |||
| 1 | 20mm x 40mm, 80mm | |||
| 1 | 20mm x 40mm, 69mm | |||
| 3 | 20mm x 40mm, 830mm | |||
| 2 | 20mm x 40mm, 858mm | |||
| 3 | 20mm x 40mm, 860mm | |||
| 1 | 20mm x 40mm, 860mm | |||
| 1 | 20mm x 40mm, 96mm | |||
| 20×80 140mm | ||||
| 2 | 20mm x 80mm, 70mm | |||
| 40×40 11752mm | ||||
| 2 | 40mm x 40mm, 100mm | |||
| 2 | 40mm x 40mm, 1130mm | |||
| 8 | 40mm x 40mm, 120mm | |||
| 2 | 40mm x 40mm, 120mm | |||
| 1 | 40mm x 40mm, 1418mm | |||
| 1 | 40mm x 40mm, 1564mm | |||
| 1 | 40mm x 40mm, 1620mm | |||
| 1 | 40mm x 40mm, 190mm | |||
| 2 | 40mm x 40mm, 360mm | |||
| 3 | 40mm x 40mm, 860mm | |||
| 40×80 5320m | ||||
| 2 | 40mm x 80mm, 100mm | |||
| 2 | 40mm x 80mm, 1620mm | |||
| 2 | 40mm x 80mm, 940mm | |||
| 1 | Luftschlauch 6x4mm, 10 Meter | PUT6-10-CB | ||
| 3 | Schlauchkupplung, 6mm, M5 | MSELL6-M5 | ||
| 1 | Schlauchverbindung, 6mm | MSBUL6 | ||
| Nutensteine | ||||
| 15 | M3 | HNTE5-3 | ||
| 13 | M4 | HNTE5-4 | ||
| 26 | M5 | HNTE5-5 | ||
| 604 | M5, post-assembly, selbstsichernd | HNTPZ5-5 | ||
| 1 | Wasserschlauch 9mm, 10 Meter | AHOS9-10 | ||
| Unterlegscheiben | ||||
| 10 | DIN125 (Form A), M4 | |||
| 248 | DIN125 (Form A), M5 | |||
| 50 | DIN9021 (Form G), M4 | |||
| 40 | DIN9021 (Form G), M5 | |||
| 4 | Präsizion, ID 6mm | WASSH12-6-2 | ||
| 1 | Präzision, AD 19mm | FWS-D19-V15.0-T1.0 | ||
| 89 | Schnorr-like, lock, M3 | GTS3 | ||
| 24 | Schnorr-like, lock, M5 | GTS5 | ||
alte Posten
| Anzahl | Originalposition | Überarbeitete Position | Materialquelle |
| 1 | aluminum bracket ext | | |
| 50 | angle bracket, singl | | |
| 20 | angle bracket, singl | | |
| 38 | angle bracket, doubl | | |
| 8 | angle bracket, doubl | | |
| 7 | angle bracket, doubl | | |
| 2 | cable carrier, 20 li | | Selbst drucken (Größe anpassen): http://www.thingiverse.com/thing:119814 |
| 1 | cable carrier, 23 li | | Selbst drucken (Größe anpassen): http://www.thingiverse.com/thing:119814 |
| 1 | panel rubber seal 12 | | |
| 10 | planar bracket, doub | | |
| 2 | plastic handles | | |
| 1 | drive shaft, stepped | | |
| 1 | drive shaft, stepped | | |
| 2 | drive shaft, stepped | | |
| 2 | drive shaft, stepped | | |
| 4 | shaft coupling, 6 to | | |
| 3 | slide washer | | |
| 1 | timing belt GT 3M, 9 | | |
| 1 | timing belt GT 3M, 9 | | |
| 1 | timing pulley GT 3M, | | |
| 1 | timing pulley GT 3M, | | |
| 1 | timing pulley GT 3M, | | |
| 1 | timing pulley GT 3M, | | |
| 3 | timing pulley GT 3M, | | |
| 1 | air tube, ODxID 6x4m | | |
| 3 | one-touch coupling, | | |
| 1 | one-touch panel-moun | | |
| 1 | water hose ID 9mm, 1 | | |
| 4 | washer precision, ID | | |
| 1 | washer precision, OD | | |
| 89 | washer Schnorr-like, | | |
| 24 | washer Schnorr-like, | | |
projekte/lasersaur-overview/mechanik-bom.1407588464.txt.gz · Zuletzt geändert: 2015/11/27 23:16 (Externe Bearbeitung)