projekte:minifraese:assembly_motor_axis
Dies ist eine alte Version des Dokuments!
Inhaltsverzeichnis
Motor-Achsen
Parts list
- Alu-extrusions
- 3 x Profil_5_80x20_L=80
- 3D-printed parts
- 4 x mcs_endkappe_kreuzschlitten_80x20
- 1 x mcs_endkappe_schlitten_80x20
- Screws (DIN 7984)
- 20 x M5x10mm
- 6 x Madenschraube DIN 914 M3 x 4 mm
- Nuts (DIN 7984)
- 6 x Mutter tr8
- Igus
- 12 x Gleitlager JFM_0810_10_1
Assembly
Schlitten
- Put two Gleitlager into the second-biggest holes of each endkappe_schlitten so that their rim fits into the depressions in the endkappe
- Add to each endkappe_schlitten a Mutter tr8 into the middle hole from the other side. Do not fix them with a Madenschraube yet
- Attach the endkappe_schlitten to one Profile with 4 M5x10 screws so that the rims of the Gleitlager are covered by the Profil.
- Finally fix the 2 tr8 Muttern with Madenschrauben
Kreuzschlitten
- Put two Gleitlager into the second-biggest holes of each endkappe_kreuzschlitten so that their rim fits into the depressions in the endkappe
- Add to each endkappe_kreuzschlitten a Mutter tr8 into the middle hole from the other side. Do not fix them with a Madenschraube yet
- Attach two endkappe_kreuzschlitten to each of the Profile with 8 M5x10 screws so that the rims of the Gleitlager are covered by the Profil.
- Attach the now u-shaped two Profile to each other so that they hug each other with their u-shape and fix them with 8 more M5x10 screws
- Finally fix the 4 tr8 Muttern with Madenschrauben
projekte/minifraese/assembly_motor_axis.1446743594.txt.gz · Zuletzt geändert: 2015/11/27 23:16 (Externe Bearbeitung)