Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- projekte:minifraese:protocol_frame [2015/11/05 22:29] – exoplanet
+++ projekte:minifraese:protocol_frame [2015/11/27 23:22] (aktuell) – Externe Bearbeitung 127.0.0.1
@@ Zeile 3: / Zeile 3: @@
 ==== Lower Frame ====
-  * 1. We tap holes with the taps into alu-extrusions to merge it with 3d printed mcs I-connertors (60x60) and endkappe".
+   - - We tap holes with the taps into alu-extrusions to merge it with 3d printed mcs I-connertors (60x60) and endkappe".
-  * 2. We connect two horizontal extrusions with other two and screw mcs winkel-stabil (40x20) together.
+  -  - We connect two horizontal extrusions with other two and screw mcs winkel-stabil (40x20) together.
-  * 3. We add angle connectors (mcs_winkel_stabil_40x20) to support the new struts
+  -  - We add angle connectors (mcs_winkel_stabil_40x20) to support the new struts
-  * 4. We connect third horizontal bar to the just build rectangle 120mm from the rear horizontal extrusion using angle connectors (mcs_winkel_stabil_40x20)
+  -  - We connect third horizontal bar to the just build rectangle 120mm from the rear horizontal extrusion using angle connectors (mcs_winkel_stabil_40x20)
-  * 5. We add end covers (mcs_endkappe_40x20) to the sides of the foremost and hindmost extrusions
+  -  - We add end covers (mcs_endkappe_40x20) to the sides of the foremost and hindmost extrusions
+  -
 ==== Vertical Frame ====